Page 11 - Balloon Basics

MagicArch™

Ingredients

MagicArch™ balloons (use MagicArch™ calculator*
below to determine quantity needed)

Arch Line
(do not use Monofilament)

Brick or Base Plate
Mini Cool Aire Inflator (for air-filled only)
3/4" Conduit (for air-filled only)
1/8" Aluminum Rod (for air-filled only)

Instructions Courtesy of Anagram International
©2013 Balloons Everywhere, Inc.
1) Cut arch line to desired arch
length plus two extra feet. All rights reserved.

2) Attach one end of arch line to MagicArch™ Calculator*
a heavy weight (brick, water
weight, etc.) Taller than Wide:
(2 x ______in) + ______in = ______in ÷ 7.8 = ______
3) Helium inflate first Magic Arch™ height width total length units needed
unit.
Wider than Tall:
4) Thread arch line through the _______in + _______in = _______in ÷ 7.8 = _______
center of the MagicArch™. height width total length units needed

5) Repeat steps 3 - 4 until all Same Height and Width:
MagicArch™ units are attached. (1.5 x _____in) + ______in = ______in ÷ 7.8 = ______
(Turn each 90° for a snug fit). height width total length units needed

6) Secure arch line to a second
heavy weight (brick, water
weight, etc.)

Note: For an air-filled MagicArch™
column, use the Foil and Arch
Column Kit (#721124)

800-7F3A5X-3528 800-P2h3o9n-e2000 11