Page 14 - Balloon Basics

Arch & Column
Kit Instructions
Latex - #721132
Latex Arch and Column Kit includes:
• 4 Fillable Bases
• 4 Interlocking extension poles (8 pieces)
• 1 - 20 ft. expandable arch frame
• 1 High Speed electric latex balloon inflator
• 60 Balloon Rings
• 1 Set Balloon Column Topper Caps
Additional items needed:
• 160 - 11" latex balloons

Balloon Ring Instructions:

1) Inflate latex balloons using
balloon air inflator. For best
results, inflate each balloon
to a consistent 10" diameter.
2) Insert inflated balloons into
a slot in the balloon ring w. ith the knot of the balloon on the inside of the ring.
You will need four balloons for each ring.
3) If you are building a column, you will need eight balloon rings (32 balloons).
For an arch, you will need 32 balloon rings, .(128 balloons).

Column Instructions:

1) Connect both pole pieces to make 2 large extension poles. Make sure the button
on one pole aligns with the hole of the other pole half and locks into place.
2) Insert the 62" pole into the pole receptacle cup in the base and turn the top of
the pole receptacle to tighten around the pole for a secure fit. Do not over tighten.
3) One by one, slide a balloon ring with the 4 attached balloons over the pole.
Make sure the slots on the .balloon ring are facing downward. This keeps the
balloons from possibly coming out of the slot.
4) Once the balloons are stacked on the pole, press down on the top balloons to
expose enough of the top portion of the pole to allow you to attach the top
balloon with a Column Topper Cap or strong tape.
5) Once the top balloon is attached, remove pressure on the balloons and let them
rise up to meet the Column Topper Cap. Your column is now complete!

14 800-7F3A5X-3528 800-P2h3o9n-e2000