Page 12 - Balloon Basics

Arch & Column
Kit Instructions

Foil Kit - #721124

Foil Arch and Column Kit includes:

• 4 Fillable Bases
• 2 Interlocking extension poles (4 pieces)
• 1 - 20 ft. expandable arch frame
• 1 Electric foil balloon inflator
• 1 Set Balloon Column Topper Caps NHeeeNldiouedm!

Additional items needed:
• 58 MagicArch™ modules
• 2 Jumbo column topper balloons

Base Assembly Instructions:

1) Remove the pole receptacle bottom of each base.

2) Place the bases where you intend to display your columns.

3) Fill the bases with sand, kitty litter or marbles for
stability. (Filling the bases with water is NOT
recommended.) Note: Be careful not to drop the
bases when weighted. Dropping or slamming bases
when full may lead to cracking and b. reakage of the base.

4) Insert the pole receptacle into the center of each base,
align and turn to lock.

Column Instructions:

1) Air inflate 10 MagicArch™ modules.

2) Connect pole pieces to make 2 large extension poles. Make sure the button on
one pole aligns with the hole of the other pole half and locks.

3) Insert the 62" pole into the pole receptacle cup in the base and turn the top of
the pole receptacle to tighten around the pole for a secure fit.

4) One by one, slide the center hole of each MagicArch™ balloon over the pole.
Use alternate colors if desired.

5) Once the balloons are stacked on the pole, press down on the top balloons to
expose enough of the top portion of the pole to allow you to attach the top
balloon with a Topper Column Cap or strong tape.

6) Once the top balloon is attached, remove pressure on the balloons and let
them rise up to meet the balloon topper. Your column is now complete!

12 800-7F3A5X-3528 800-P2h3o9n-e2000